MVS motherboard measurements for protective covers

[primarydirectiv]

Hello everyone. Does anyone still have viable links to these documents 3Lions posted all the way back in 2016. I have been meaning to make covers for my MV 1FT and my 2 slot for forever. The 2 slot is simple, I just need to mimic the metal shroud, but the single would be helpful. 3Lions has been out of the 2 slot for many years, and I do not see that my variation of the 1Slot was ever reported. Thank you in advance. Here are the old links; long gone.

APPROVED LIST - These plates are being made
MV2F top plate
MV2F bottom plate
PGM Base Plate
MV1FZ Base Plate
MV1C pcb base plate
MV1C base plate for Existing Plastic Cover


CANCELLED LIST - No Measurements received
MV4F top plate
MV4F base plate
MV2 Base Plate - https://www.dropbox.com/s/omznwek4wigajra/MV2 base dimensions test v2.pdf?dl=0
MV2 Top Plate - https://www.dropbox.com/s/7bbtb9x2pu2g3n1/MV2 top dimensions test v2.pdf?dl=0
MV4 Base Plate (1 VERIFICATION) - https://www.dropbox.com/s/mzk8o6ut2n309s3/MV4 base dimensions test v3.pdf?dl=0
MV4 Top Plate (1 VERIFICATION) - https://www.dropbox.com/s/oaxj8otmsaxb37f/MV4 top dimensions test v3.pdf?dl=0
MV6 Base Plate (1 VERIFICATION) - https://www.dropbox.com/s/bze2qwfs72n87bq/MV6 base dimensions test v4.pdf?dl=0
MV6 Top Plate (1 VERIFICATION)- https://www.dropbox.com/s/xqz02ia6rn0v6zj/MV6 top dimensions test v4.pdf?dl=0

 

[Lagduf]

@CORY can you move This thread to Tech support or general discussion?

 

[CORY]

@CORY can you move This thread to Tech support or general discussion?

Done.

 

[buaku]

Looks like I have 2 slot and 6 slot files.

 

[pierpa86]

Hello, i need size for MV2F board top and base. anyone have dimension ?

Thanks

 

[pierpa86]

any help here ?