Hey guys. I have a mv-1 and bvm. I have pots on the rgbs lines and have been told that the output voltage should be .7 volts. I set the voltage by putting a meter on the end of the cable on each line, with the neo sitting on the screen color adjustment screen in the hardware test menu. Is this the right way to go about this? My bvm has been acting up, and I have a feeling this is the problem. Although about two years ago I had it shipped to me via ups. I have never been totally sure they didn't fuck it up. Every once in a while it would do something odd, but it has been acting up more since I hooked my neo up. Any help would be appreciated.