I have 2 MV-1C boards that are non-functional. They were CMVS'd, or on their way to be, so there are modifications listed below.
Board-1: Was my CMVS until it got fried. Got 12v to it's 5v line. Boots to solid blue or red color, does not get any further.
• Bios Removed and socket installed for Unibios (this was pre-Biosmasta era)
•Audio amp components removed for 5v mod
•Battery backup mod ready, just needs battery holder.
•Fuse removed (only used for 12v line anyways)
•Was re-capped
Board-2: Going to be new CMVS but turned out to not work, same problem as Board-1, but unsure of what happened to make it do that.
•Bios removed
•Audio amp components removed
•Battery mod complete, just needs battery holder.
Functional MV-1C Original Bios. Removed from tested and working board with SMD heatgun, all pins are straight and intact, protected with heat resistant tape when removed.
I just feel bad throwing anything away that someone might want for parts. Make me an offer.
Board-1: Was my CMVS until it got fried. Got 12v to it's 5v line. Boots to solid blue or red color, does not get any further.
• Bios Removed and socket installed for Unibios (this was pre-Biosmasta era)
•Audio amp components removed for 5v mod
•Battery backup mod ready, just needs battery holder.
•Fuse removed (only used for 12v line anyways)
•Was re-capped
Board-2: Going to be new CMVS but turned out to not work, same problem as Board-1, but unsure of what happened to make it do that.
•Bios removed
•Audio amp components removed
•Battery mod complete, just needs battery holder.
Functional MV-1C Original Bios. Removed from tested and working board with SMD heatgun, all pins are straight and intact, protected with heat resistant tape when removed.
I just feel bad throwing anything away that someone might want for parts. Make me an offer.