Official Ninja
where did you get that black metal wire shelf?
My work isn't super clean, and I need to redo the overlay. I decided against a fold down screen as the rig is about 40 lbs as is. Easier and safer to be able to detach the screen. I disassembled the screen's stand and mounted the support directly to the setup. The monitor simply slides into place and is fully tiltable for viewing comfort. There are legs to make this thing free standing at cab height. But I need to add some extra bracing to the legs to make it more stable.
Parts are as follows:
Neobitz component converter
Neo Gold control panel/and full wiring loom
MV-1F
switching PSU
happ supers and buttons
textured t-molding
I cut the MDF myself from new stock
Neo Geo cab side art for decals.
19" samsung hdtv
I haven't finished my CMVS yet but here's a look at my custom joystick. A homage to the Classic AES Stick.
Sanwa JFL Joystick
Seimitsu screw in buttons
Thanks to Samurai10000 for the custom case and Electrograve for the overlay template which I slightly modified.
That thing looks better at your house than it does mine. I think I need to update the lighting in my work area.
Finished my first CMVS! Thanks to Xian Xi for the great guide on how to consolize a 2 slot board. I sanded down the metal cover and took down all the sharp corners to make it more friendly on the hands. Then spray painted it with metal primer and finished it off with gloss black spray paint. I have the battery mod left to do.
Don't you have a marquee that glows on your cab?
Yes, but its supposed to be there. its hardly a big blue LED either is it.
Just looks so ricer PC ish
oh by the way its not a marquee its an illumination panel, the marquee is above it
Ricer PC...LOL
Everyone likes their stuff their own way just like you.
I like the phtographs around the bezel, they class it up Rocky style...ruffles! I haven't seen a Data East cab conversion 'till now. That cab has potential man, the curve marquee is cool looking, if it was me I try to make something special out of that cab.I don't know if there's a cab pic thread but here's my conversion. I like it.
I still have to replace the control panel/rewire underneath as it's pretty craptacular but the rest of it is great. I replaced all of the sticks/buttons with Happ parts (hey I like em), got new cam locks and generally cleaned up the whole rig.
I don't know if there's a cab pic thread but here's my conversion. I like it.
I still have to replace the control panel/rewire underneath as it's pretty craptacular but the rest of it is great. I replaced all of the sticks/buttons with Happ parts (hey I like em), got new cam locks and generally cleaned up the whole rig.