WTB: Neo CD top loader

[slugger_dan]

this is for the debugging BIOS. can someone set us up with a decent deal on an unboxed system? no joypads required, but we do need a PSU. If the PSU can operate in 230-240V 50hz it's great, or if it can work at 110-120V then an ordinary stepdown might be all we need. don't know the specs of the PSU at all. If it is a dead PSU then the connector can be tied to one of those HDD PSU on ebay I think. Let us know your price and postage.

It would help us a ton,thanks!

 

[bdlou]

Been following the debug thread. Probably be best to add if you're looking for a front loader, top loader, or both. (I assume both for compat testing).

Also, here is a link for those that are not aware of the amazing work going on:
http://www.neo-geo.com/forums/showthread.php?t=209086&page=7

 

[slugger_dan]

In the thread title

for compatibility testing a Z and either a front/top loader would be the best because the latter two are apparently very similar internally. but Z carries that collector price tag, so only a top loader is really in reach right now.

 

[slugger_dan]

bump. development is stalled without one of these