VGA converter H sync and V sync from C sync?

[Official Ninja]

I have a really nice RGB to VGA converter. Its a homebrew device made for the Tandy Color Computer 3. I've made a cable and also have used it with an Atari STf computer.

I'd like to see if I can make a cable to use my AES with it, but the AES puts out C-sync while this devices need seperate H-sync and V-sync.

So the question is, how would I go about seperating the C-sync in to H and V sync ?

 

[CafeineCake]

You might want something based around
LM 1881. I have not tried it but it looks promising.

I am sure other members have better ideas about a sync separator.

 

[FA-MAS]

I believe a jrok sync cleaner can also split them. Prebuilt solution based off something similar to the LM188

 

[Official Ninja]

Thanks. I ordered the Jrok sync cleaner from Jamma Nation-X

 

[MKL]

The JROK sync cleaner splits CSYNC into HSYNC and VSYNC and then recombines them into CSYNC.

For properly separating H and V Syncs you should use a EL4583.

 

[Xian Xi]

The JROK sync cleaner splits CSYNC into HSYNC and VSYNC and then recombines them into CSYNC.

For properly separating H and V Syncs you should use a EL4583.

Can you do the mod where you remove the upper IC and tap it that way like you showed in the past?

 

[MKL]

You can mod the jrok, sure but then it would be easier to just get a EL1883 or LM1881 or better a EL4583 (which has a proper Hsync unlike the other two).