tenfresh
Mega Shock!!,
- Joined
- Jul 30, 2003
- Posts
- 113
After years of traffic the slots in my MVS cab are getting problematically finicky; particularly the heavy-use front one. Cleaning the contacts seems to only make a nominal improvement anymore.
I'm presuming that the contacts just bent back too loose at this point and it's time to replace the parts. Or as anyone worked out a trick for bending them out? I confess I haven't pulled one off yet to see if there's a way to do it easily from underneath.
So far I've had no luck finding a source for that part new; which seems preferable over removing them from a used board. (or replacing the board entirely)
Any tips/info/suggestions for breathing new life into these slots would be appreciated!
(That's what she said)
I'm presuming that the contacts just bent back too loose at this point and it's time to replace the parts. Or as anyone worked out a trick for bending them out? I confess I haven't pulled one off yet to see if there's a way to do it easily from underneath.
So far I've had no luck finding a source for that part new; which seems preferable over removing them from a used board. (or replacing the board entirely)
Any tips/info/suggestions for breathing new life into these slots would be appreciated!
(That's what she said)