Neo stick not recognizing a direction, how to fix?

[Edmond Dantes]

So I have two sticks with my AES. One works fine, but the other sometimes won't register when I push up on the stick, or will only kinda-register it. Like jumps won't work in fighting games, and in Magician Lord he'll start to climb a ladder but then not go past the first rung.

Basically, what should I do to fix this? Since these are expensive sticks I don't want to attempt a repair and end up destroying them even further (an experience I had once already with something else), at least not without advice from people who are smarter than me.

Thanks in advance.

 

[ggallegos1]

Open her up and take pics, sounds like either a loose wire or something not registering correctly at the controller connection

 

[aha2940]

Neo sticks are literally just some microswitches and cables. They have no fancy circuits or anything. I'd try first replacing or repairing the microswitch. Remember that the microswitch for UP is the one in the down position of the stick. If that does not help, check that the cable is not broken and that the connection at the DB-15 port (end of the cable) is fine and making good contact.

 

[wju2004]

Here's a nice little video that might actually help. Watched it and it gave me ideas on how to work on one that I might come across that is broken. Not a professional fix in some ways, but certainly might help you.

https://www.youtube.com/watch?v=lDAOdaUWizk

 

[Edmond Dantes]

Thanks. Sorry I haven't posted pics, just things got busy IRL.

 

[Xian Xi]

It's either a bad wire/bad cable, bad microswitch or bad solder joint.