akirasan
n00b
- Joined
- Jan 24, 2013
- Posts
- 24
Hi,
I've recovered a MVS2F from an old arcade and the owner did not guaranteed me the right function, so I decided to follow the manual consolización JNX on a MVS2F. I've put a power source of a cellphone that works on 5V, the battery mod and SCART video output as explained in the tutorial (taking RGB signals, sync, 5V and GND only).
The machine turns on properly, the red LED is on but screen shows what you see in the picture:
What's happening here? It has a brand new unibios 3.2 , so I discard a problem with the BIOS concerning the chip. It not shows anything but this.
Thanks in advance!
I've recovered a MVS2F from an old arcade and the owner did not guaranteed me the right function, so I decided to follow the manual consolización JNX on a MVS2F. I've put a power source of a cellphone that works on 5V, the battery mod and SCART video output as explained in the tutorial (taking RGB signals, sync, 5V and GND only).
The machine turns on properly, the red LED is on but screen shows what you see in the picture:
What's happening here? It has a brand new unibios 3.2 , so I discard a problem with the BIOS concerning the chip. It not shows anything but this.
Thanks in advance!