MS2931 with dim picture

theGau

Not so MEGA, eh?
This is what it looked like before doing anything to the monitor as well as it is now, I just "clean and balance" each gun and it got me back to the original picture but it really is unplayable in the condition.

https://scontent.fagc1-2.fna.fbcdn.net/v/t1.15752-9/s2048x2048/50542085_528591044315870_7762523105364279296_n.jpg?_nc_cat=108&_nc_ht=scontent.fagc1-2.fna&oh=cf466e2c1b119aa507d6f83781a59d39&oe=5CBF5EEB

And this is what it looks like if I rejuve the blue and green guns respectively, but as a note I could rejuve all three but whichever I do last is what color will be dominate.

Blue pic
https://scontent.fagc1-2.fna.fbcdn.net/v/t1.15752-9/50416154_390533685052189_9198106694167560192_n.jpg?_nc_cat=108&_nc_ht=scontent.fagc1-2.fna&oh=ac17103f7fbeb40926dd2f569f1eceeb&oe=5CC1943A
Green pic
https://scontent.fagc1-1.fna.fbcdn.net/v/t1.15752-9/50234381_369170897247262_3661242062566588416_n.jpg?_nc_cat=102&_nc_ht=scontent.fagc1-1.fna&oh=fef07d256817efab29d2834512d94fa0&oe=5CC559A7

I would have a red pic too but forgot to take a pic of it, but you should get idea of the issue by now.

Tube is a A68LBT696X
 

Niko

Giga Shock!!
Before the rejuvenation process, I'd have suggested adjusting the voltage on the flyback.

But now, I have no idea.
 

theGau

Not so MEGA, eh?
Before the rejuvenation process, I'd have suggested adjusting the voltage on the flyback.

But now, I have no idea.

I did and it didn't have a effect on the screen. It is like I can either have 100% of one gun or 10% of all three.
 

lachlan

drunk downunder!, aka. Muff Diver.,
So you decided to do a rejuve before you adjusted the screen pot on the flyback?
 
Top