Converting a hyper Neo 64 Motherboard

[dave010567]

I thought I would post this question not sure if it has been asked before or is possible. Is it possible to convert a rev2 motherboard into a driving motherboard? I have stripped a rev2 motherboard and photographed it (pics below). Would someone be able to do the same to a driving motherboard so we could see where the differences are.






Thanks for looking
Dave

 

[purple]

http://imageshack.us/user/erhanpurple

here is some images of my hyper, what are the differences? its rev1 or figting. dates?

 

[purple]

there is no difference. so what makes them rev1 or rev2? some seller from ebay told me that lvs-mac1 is the correct serial for rev2. is that correct?

 

[xsq]

there is no difference. so what makes them rev1 or rev2?

Revision 1 does not have sound from the Jamma edge but rather from a JST connector on the front of the mobo. Easiest way to tell if it's a Revision 1 mobo is the volume pot. Revision 2 has a switch on the bottom of the mobo that let's you toggle between Jamma pinout as well as MVS pinout.

From the JNX Hyper Neo Geo 64 Price Guide (click "Hyper Neo Geo 64 Motherboards" for more details).

 

[purple]

im talking about the motherboard not i/o board

 

[Xian Xi]

From the JNX Hyper Neo Geo 64 Price Guide (click "Hyper Neo Geo 64 Motherboards" for more details).

That reminds me, I need to get those pics from Brian.