LordKirkis

True. Nearly screwed up my console. :cautious:

Yeah, I think some of these CSYNC mods need disclaimers attached. That CSYNC mod on retrorgb especially needs one or to be removed...

Good call Ill do that and report back.

I'm loathe to recap with my skill level, so I'll be curious to hear how it works out. Please share. Maybe recap the video section first...

Too late and unfortunate. But either way I will do my best to care and preserve it as it is now. The caps will also be replaced and in...

Ill be recapping my system and will see if I can find good news in that regard.

I did not get around to trying since I jumped the horse and ended up modding the console. Not sure if still an option, but Luma works...

My Front Loader has the exact same issue! Did you ever find a fix for that!?

Hey guys update I got the replacement CXA chip (i think original too) same resistance as the original chip. I replaced it and sure...

Mayb maybe similar network but through these points?

The resistor network gave me csync signal directly to BVMD32 but not through extron crosspoint 450

I will try.

@LordKirkis the CXA1645P is easy to find in case you've shot it Pin 7 is NTSC/PAL switching 4.7V is fine IMO to set NTSC I don't...

okay I checked my notes, this won't work with a simple resistor network, needs a sync splitter to get CSYNC

Thanks both of you… Ive since found out the dimming was due to the BVM calibration settings reseting due to old battery. That said the...