Orochi Iori Y
Frenzy Football Player
- Joined
- Mar 18, 2004
- Posts
- 992
Been working on a consolized MVS over the past 3-4 weeks off and on. Mostly waiting for parts to make their way to my mailbox. The Neo CD is a fairly tight fit for this project, but I really like the look of it once it is done. Just finished it this weekend, here are some pics:
Here it is in action, playing some MotW.
Here is a closer shot of the unit from the front.
From the top with no cart, you can see some of the wiring and the pcb, so I'll just keep a cart in at all times to keep the dust out.
Here is the back of the unit. I used RCA/S-video connectors that were part of the original NeoCD for the project. Just desoldered them from the NeoCD pcb they were on and wired them up to the jrok and MV-1C. The square button is a pause button, red is service and there is a black test button hiding behind the PS cable.
Here are the insides, not as clean as I wanted things to look, but not too bad...
A big thank to NGT for answering alot of my questions and helping me figure out what I wanted to do and how with this project!
PS - The NeoCD used for this project was dead before I chopped it up...
Here it is in action, playing some MotW.
Here is a closer shot of the unit from the front.
From the top with no cart, you can see some of the wiring and the pcb, so I'll just keep a cart in at all times to keep the dust out.
Here is the back of the unit. I used RCA/S-video connectors that were part of the original NeoCD for the project. Just desoldered them from the NeoCD pcb they were on and wired them up to the jrok and MV-1C. The square button is a pause button, red is service and there is a black test button hiding behind the PS cable.
Here are the insides, not as clean as I wanted things to look, but not too bad...
A big thank to NGT for answering alot of my questions and helping me figure out what I wanted to do and how with this project!
PS - The NeoCD used for this project was dead before I chopped it up...
Last edited: