Jackafur
Kuroko's Training Dummy
- Joined
- Jan 6, 2004
- Posts
- 76
Ive been putting this off for awhile. I got this consolized MV-1T a couple of months ago. It has 2 issues. The first issue is it seems to work fine except when I play either metal slug 3 or metal slug x. I get alot of sprite flickering in X and random black/colored lines on Mission 3 in metal slug 3. This happened on 3 different metal slug 3 carts btw. I havent encountered any issues with any other games.
http://imgur.com/a/iiLlZ
http://imgur.com/a/iF0vS
The second issue I'm honestly not super concerned about but whenever I use the "consolized" s-video jack I get interference on the screen. This interference doesn't exist when using scart on my supergun. it's almost like jailbars. Also it seems like this interference is relieved a little bit when using my supergun to power the MVS on instead of using the power supply that was provided with the board. I'm assuming this isn't normal when using the encoder. The encoder is a JNX stryder. Is any of this stuff fixable or should I just sell it with full disclosure?
http://imgur.com/a/iiLlZ
http://imgur.com/a/iF0vS
The second issue I'm honestly not super concerned about but whenever I use the "consolized" s-video jack I get interference on the screen. This interference doesn't exist when using scart on my supergun. it's almost like jailbars. Also it seems like this interference is relieved a little bit when using my supergun to power the MVS on instead of using the power supply that was provided with the board. I'm assuming this isn't normal when using the encoder. The encoder is a JNX stryder. Is any of this stuff fixable or should I just sell it with full disclosure?