Recent content by m1chelsen

A lot of you might know, that the Raspberry Pi offers a good and cheap way, to emulate old games. For me, the downside was, that the Pi itself looks a bit borring, so after i saw a video from another youtuber (https://www.youtube.com/watch?v=4oMongjNslg) i decided to build a small "arcade...

After we moved to our new house, I have finished my gameroom, that is around 20-21 m2. I'm pretty happy about the result, and i have made a game room tour :) After i made the video, i finally finished the build of a table, for my PC / modding setup.

I just made a nice deal, and bought 2 Neo Geo 2-slot boards, marked as "faulty", for a very low price. I have now hooked both boards up with my supergun, with the following results: MVS1: Audio works well, no problem. Video is very dark, but it is possible to som grayish outlines from the...

Hi there, Maybe some of you guys have experience with X360 modding? My good old Premium JTAG console died once again, and my time with fat X360 consoles are over. To much trouble :D I have bought a X360 slim, with trinity motherboard, that i want to run with FreeStyleDashboard. I still am...

Just wanted to share some of my consolized builds. Some of them, have already been shared :) Consolized Neo Geo MVS (MV-1FZ): https://www.youtube.com/watch?v=tX0PXYaf5fw&index=1&list=PLnSq7iQTYTjyxqVXqynDe7Sezp3xPYZHU Consolized SEGA ST-V...

Edit double post wtf :/

Just made a trade, where i got a MV-1FZ board. I startet to consolize it wednesday, and the casing is almost done :)

Finished my SuperGunStick, a couple of days ago.

Hi there, I´m at the moment in the process of building a consolized Taito F3 setup, but i dont have a game for it jet. If i turn on the system WITOUT game, i get a "broken picture", that stays on for 2 seconds, and then switches of, and agian on. The loop goes on. I have a recorded how it...

Just testet the system last night, and tried to boot it up. I done have any F3 games at the moment, så the result is as shown in this videoclip. Just a loop: https://www.facebook.com/photo.php?v=10203471441571824&l=1895441726069917242 Link...

Hi there. Im in the process of building a consolized Taito F3. As far as i know, the JAMMA connector puts out mono sound, but there is a S-connector for sterio sound. I looked the 4 pin S connector up in a Puzzle Bobble manual, and the pinout is as in the picture: But how du i read this...

I dont have a trackbaal, and will probably never get one :/ But the system is still very open, so it will not be a big deal to switch the jumper if necessary. First layer og varnish has just been added!

Thanks for the feedback. Yes i used the same font again, and i think its an okay solution, to keep it on a budget :) Rob Black - I use the same arcadesticks, that i build for my CMVS / CHNG64. I´m on to a new project atm, where i will consolize a Taito F3 board. This time it will be a more...

Just finished my consolized ST-V with internal PSU

Still need some text for the "Test" and "System" bottons, but almost done! Testet, and working. Now I only need to build the internal PSU. About to design and test the 5V part of the PSU.