Project: Consolized Sega ST-V

[m1chelsen]

Hi there,

I´m in the process of builing a consolized ST-V, and wanted to show my progress.

At the moment i have build the case, and that part is done. Now i need to give it a paintjob, but i am still thinking about the design.

Besides that i need to solder the wires, and the ST-V should be finished soon

Here are some pictures (and some text in danish):

http://konsolting.blogspot.dk/2014/01/projekt-consolized-sega-st-v-del-1.html

http://konsolting.blogspot.dk/2014/02/projekt-consolized-sega-st-v-del-2.html

 

[NeoGeoNinja]

As long as it looks nicer than 'that', then it should look alright, especially if it matches what you've outlined in your proposed mock-ups...

 

[lantus360]

Hi there,

I´m in the process of builing a consolized ST-V, and wanted to show my progress.

 

[pipes]

The consolized Naomi has already been done as well

 

[ECZangief]

Well, I'm the third person who came to make the same joke.

There is something to be said for no load time though. Good luck with the project!

 

[GohanX]

Pope and I were talking about this a while back, it will be interesting to see what you come up with.

 

[Pope Sazae]

Pope and I were talking about this a while back, it will be interesting to see what you come up with.

I'm going to end up buying something like my 5th ST-V, damn system.

 

[m1chelsen]

Case almoste done. I only need some text. After that, i need to build the internal PSU and do all the wiring

 

[m1chelsen]

Still need some text for the "Test" and "System" bottons, but almost done!



Testet, and working. Now I only need to build the internal PSU.



About to design and test the 5V part of the PSU.

 

[m1chelsen]

 

[whisper2053]

That is super amazing!

Now I want one haha

 

[Hans Grösse]

That thing is basically a Sega Saturn with a cart instead of a CD right?

 

[GohanX]

I want to make sweet love to it.

 

[theMot]

That font again....

Otherwise nice job.

 

[_rm_]

That font again....

Otherwise nice job.

Yup, for me that font kills it a little bit. But the overall look is very good.

Congrats on that!

 

[Xian Xi]

I'd remove the sticker and either replace it with a nice STV logo or some art with a chick with big tits making the buttons her nipples.

 

[GohanX]

Your next cmvs should have that pic. I'd buy it but ya know, I've already got one.

 

[codecrank]

I'd remove the sticker and either replace it with a nice STV logo or some art with a chick with big tits making the buttons her nipples.

I'm sure ViceMickey could make something nice

 

[Rob Black]

can you post pics of the controllers???

 

[m1chelsen]

Thanks for the feedback.

Yes i used the same font again, and i think its an okay solution, to keep it on a budget

Rob Black - I use the same arcadesticks, that i build for my CMVS / CHNG64.


I´m on to a new project atm, where i will consolize a Taito F3 board. This time it will be a more open finish, where you can se the wires. I will work hvis the deep-effect of plywood combined with many layers of varnish. The casing is build witout screws

 

[Xian Xi]

Don't forget to add a switch for the joystick/trackball jumper.

 

[m1chelsen]

Don't forget to add a switch for the joystick/trackball jumper.

I dont have a trackbaal, and will probably never get one :/ But the system is still very open, so it will not be a big deal to switch the jumper if necessary.

First layer og varnish has just been added!