NeoVGA FAQ and Order Thread

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
got mine today! it's a bit smaller than I expected, but hey, that's hardly a problem!

now just an MV2F guide....

MV2F guide is on the way! I'm fixing some boards for aha2940 so I have them on hand. Give me a day or so!
 

XeD

Super Sidekicks 2
Joined
Feb 18, 2015
Posts
106
got mine in as well. What is the small lcd thing for?
 

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
got mine in as well. What is the small lcd thing for?

I'm not sure what you're talking about; there should just be a board with a wire attached.

...did I accidentally include a part from something else in the bag?
 

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
One more guide, for NEO-AES:

AES.png
 

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
I've found a small mistake in the CPS2VGA firmware, for the few people who ordered those. I goofed and the data bus is ordered incorrectly for 15KHz modes. For 480p VGA and Component, it's not a problem, but for 15KHz RGB and Component the display will look strange. I've already fixed the firmware, and will pay shipping for anyone who wants to send the boards back to be reflashed (with or without an A-board attached).
 

AES club

Timid Neo Newbie
Joined
Feb 16, 2016
Posts
5
Hey Mike, thanks again! Works great on my AES! (Just need to find my dremel now so I can mod the case.)

Cheers!
 

bartre

Haomaru's Blade Shiner
10 Year Member
Joined
Oct 27, 2009
Posts
677
<3
I'll be tossing mine in in the next couple of weeks hopefully
 

AES club

Timid Neo Newbie
Joined
Feb 16, 2016
Posts
5
This pic was from a AES SN x2xxxx series. (So 20k~30k series I believe is a 3-3 or 3-4)

Hopefully we can get more AES input from others to see if it's the same across multiple hardware revisions.

Cheers
 

McColbo

Overtop Pathfinder
Joined
Mar 3, 2016
Posts
101
Hey Mike,

Got mine, awesome! Thanks again for everything.

Would it be possible to wire for both component out and VGA out? So I could have both a VGA port and component RCA plugs on the back of the console I'm building?

Thanks,
Colin
 
Last edited:

DrHuxtable

New Challenger
Joined
Apr 3, 2015
Posts
22
Would it be possible to wire for both component out and VGA out? So I could have both a VGA port and component RCA plugs on the back of the console I'm building

Yes -- You'll need to hook up a switch to the YPbPr and 15K jumpers.

EDIT: For a cleaner design and to save yourself some work, you can use the single VGA port and use a VGA-to-Component breakout cable. You'll still need the switches though.
 
Last edited:

mikejmoffitt

Mickey's Coach
Joined
Feb 6, 2014
Posts
578
And we're back! I'm moved in to my apartment and can do fun stuff again, like putting together a second order.
 

Jontox

Quiz Detective
Joined
Jul 19, 2016
Posts
89
As said earlier, count me in for 1 :loco:

Any feed back from 1st batch users ?
Firmware update on the 2nd batch ?

A second run so quickly is a dream comes true for a starting CMVS project...

This project is great and need advertising...
 
Last edited:

Jontox

Quiz Detective
Joined
Jul 19, 2016
Posts
89
Hi mikejmoffitt,

You talked in the development thread about a VGA to HDMI adaptator.
Which one would be better ?

Thanks for your help
 

420p

King's Dry Cleaner
Joined
May 25, 2013
Posts
383
I would still be in, but you kinda ignored everything I sent.
 

420p

King's Dry Cleaner
Joined
May 25, 2013
Posts
383
Going back in my PM history I only see one, which I'd missed. I can include you in the next order, sorry for missing your PM.
And I emailed you :D No matter what, I would be in for one of the next batch, or even the one after that ... thanks man.
 
Top