123►Genei-Jin
Overtop Pathfinder
- Joined
- Apr 9, 2009
- Posts
- 103
So I've been trying to adjust the color pots on my component modded AES but I can't for the life of me get a proper neutral white. I'm using the UniBIOS boot screen for reference.
I got the console pre-modded and the previous owner mistakenly tried to adjust the pots not realizing one of the grounds had come off/desoldered (I re-soldered the ground on my own)
Also the component input on the TV works perfect with other consoles.
Here's a pic of the board I have:
I honestly have no idea where to start since I;m not even sure what each pot does (seems like R2 controls green, R1 Red and R3 saturation or gamma), are there any tips in terms of what should I do? like for example turn all pots to the left then adjust one of them to a certain tone and then gradually adjust another one or so, I don't know, any help will be certainly welcome.
I got the console pre-modded and the previous owner mistakenly tried to adjust the pots not realizing one of the grounds had come off/desoldered (I re-soldered the ground on my own)
Also the component input on the TV works perfect with other consoles.
Here's a pic of the board I have:
I honestly have no idea where to start since I;m not even sure what each pot does (seems like R2 controls green, R1 Red and R3 saturation or gamma), are there any tips in terms of what should I do? like for example turn all pots to the left then adjust one of them to a certain tone and then gradually adjust another one or so, I don't know, any help will be certainly welcome.
Last edited: