- Joined
- Oct 25, 2007
- Posts
- 3,747
Can anyone recommend a VGA to BNC cable for use with an AES, RGB SCART cable, Arcade Forge sync strike and a 2950QM PVM?
I have tried using an old VGA -> BNC cable I have, with this setup, but it looks like there may be a problem with it (can't isolate the problem anywhere else). One of the BNC connectors (on the grey wire) came off, so I had to reconnect it. The VGA-> BNC (RGBHV) cable I have used to work fine with the 2950QM (from, memory, it worked when the grey wire was plugged into the top ext sync connector (HD/COMP), and the black was plugged into the bottom VD connector). I can't get RGB to sync on either of the two PVMs I have (the other being a 9045QM with only one EXT SYNC in connector), the screen is garbled, but the colours are OK. Turning on the sync strike doesn't improve the sync on either of the monitors. I can't get this setup to work with RGB on my PS2, either. Component YUV works fine on both monitors (on the same line inputs as RGB).
I have tried using an old VGA -> BNC cable I have, with this setup, but it looks like there may be a problem with it (can't isolate the problem anywhere else). One of the BNC connectors (on the grey wire) came off, so I had to reconnect it. The VGA-> BNC (RGBHV) cable I have used to work fine with the 2950QM (from, memory, it worked when the grey wire was plugged into the top ext sync connector (HD/COMP), and the black was plugged into the bottom VD connector). I can't get RGB to sync on either of the two PVMs I have (the other being a 9045QM with only one EXT SYNC in connector), the screen is garbled, but the colours are OK. Turning on the sync strike doesn't improve the sync on either of the monitors. I can't get this setup to work with RGB on my PS2, either. Component YUV works fine on both monitors (on the same line inputs as RGB).
Last edited: