Results 1 to 2 of 2

Thread: Panasonic Q No disc issue

  1. #1
    Crazed MVS Addict
    Neogeoman106st's Avatar
    Join Date
    Aug 2017
    Location
    Saitama, Japan

    Posts
    147

    Panasonic Q No disc issue

    Hello all

    I just recently for a very good price picked up a Panasonic Q gamecube. it had the typical Broken drive rails so the drive tray would not open (that i repaired thankfully) But now i have an issue when trying to read gamecube games. no matter what the game it gets a no disk . this Q looks to be Stock without a mod chip. i have not gone all the way down to the Gamecube mother board yet but i am pretty sure its has no mod in it. I have tried l cleaning the Laser and the Fan looks to run ok no issues. I am also pretty sure i connected all the Ribbon cables back properly. but no luck. I though it might be the Laser but it plays Dvd Videos very well even very scratched ones. Does anyone have any Ideas what this might be or have had this issue as well in the past?

    I will be taking it apart again soon to double check everything. Just building back up the nerve haha its not fun to take apart.
    Last edited by Neogeoman106st; 07-23-2019 at 10:05 AM.

  2. #2
    Crazed MVS Addict
    Neogeoman106st's Avatar
    Join Date
    Aug 2017
    Location
    Saitama, Japan

    Posts
    147
    Update:
    I took this apart yesterday again and now the Dvd' drive is not reading anything at all. when i start it up the Disk starts to spin very fast non stop. when i hit eject on the drive the tray opens and the disk is still spinning as it opens. while troubleshooting the last did wake up and start emitting light again but it just locked up and after reboot of the system it was back to the previous non working ways.
    Last edited by Neogeoman106st; 07-24-2019 at 07:46 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •