yesteryeargames
n00b
- Joined
- Mar 15, 2006
- Posts
- 49
MVS: MV-1FZ
Sony KDL 32U2000 (LCD)
Cropped image (see below) Lose one line of grid pattern on the left and slight sync issue across top...
View attachment 25143
Ok the wobbly lines issue I mentioned above only happens with US version AES. I tried two US versions (both low serial num) they both have the problem, also tried two Japanese version (high serial nums) and no wobbly lines. ?
In case it's relevant...I'm using a JP-21 RGB cable out from the Neo, then running it through an adapter cable so I can plug into the BNC connectors on the Sony PVM.
Did you replace the caps on the RGB output with the proper 470uf ones?
Firstly hello. I'm new to the forum and before I start I would like to apoligise as I have more than likely posted this in the wrong place and due to restrictions am quite limited to what I can do. I am very new to the aes but have always wanted one. I bought one a little while ago and I have noticed that there is a lot of red to the picture. The sprites change colour whilst playing from there normal colour to red. I will try add a picture to help show a little more on what I mean. Would I be right I. Saying replacing the video caps should resolve this issue? Or is it or could be something a little more challenging? Again thanks for your replies and thank you for allowing to post on this forum.
What kind of TV and what input are you using?? Give details here and plenty will be able to help guide you
Firstly hello. I'm new to the forum and before I start I would like to apoligise as I have more than likely posted this in the wrong place and due to restrictions am quite limited to what I can do. I am very new to the aes but have always wanted one. I bought one a little while ago and I have noticed that there is a lot of red to the picture. The sprites change colour whilst playing from there normal colour to red. I will try add a picture to help show a little more on what I mean. Would I be right I. Saying replacing the video caps should resolve this issue? Or is it or could be something a little more challenging? Again thanks for your replies and thank you for allowing to post on this forum.
Not sure if you can see the image. I think have restrictions. I'll try add it via a url
Not sure if you can see the image. I think have restrictions. I'll try add it via a url
I can't really say anything looks wrong in the picture. In SamSho characters turn red as part of combat... it wasn't that, was it?
I have a consolized MVS that I recently picked up from Italy (eBay) that had a SCART output. I purchased an albeit cheap S-Video/AV adapter that I had hoped would be my answer for connecting it to my Sony PVM that has S-Video inputs. However, the best I can get so far is just the audio. I assume I need something more of an encoder or XRGB rather than just an S-Video/AV adapter that I slapped on the SCART connection in this pic-
View attachment 35274
This is the original Auction for the CMVS I purchased. Any advice on what route I should go to play this in S-Video or otherwise?
http://www.ebay.com/itm/MVS-CONSOLI...lXWODfmBpRv2rv1uBOtvM%3D&orig_cvip=true&rt=nc