I'm wiring the video output to RGB as described here:
http://www.chads.arcade.btinternet.co.uk/Supergun/video_connection.htm
It says to connect +5V to pin 16 via a 100ohm resistor. Problem is I don't have a resistor
Will it work without the 5V? or do I have to wait till Monday to get one
Geezer
http://www.chads.arcade.btinternet.co.uk/Supergun/video_connection.htm
It says to connect +5V to pin 16 via a 100ohm resistor. Problem is I don't have a resistor
Will it work without the 5V? or do I have to wait till Monday to get one
Geezer