s.m.f
n00b
- Joined
- Mar 12, 2006
- Posts
- 33
Hi everyone.
I just bougt me a din and a minidin and I am about to solder a rgb lead for my Aes to the framemeister.
I have a question regarding the pinout from the Aes.
I use this one as my guide for the aes:
http://www.neo-geo.com/wiki/images/3/33/Avpinout.png
My question is, do I need to solder pin 3 (composite) and pin 7 (composite sync)?
I do only need rgb, but I was unsure if they are needed for some reason.
The pins I use in the framemeister is as follows:
http://www.gamesx.com/wiki/lib/exe/fetch.php?media=av:xrgb-mini-rgb_pinout.png
In this side, there is a Csync pin, is it needed (pin 3)
regarding sound, Pin 1 and 2, I just put mono on both pins?
And the last question, what is +5v out (pin 4 on the Aes) needed for
/Johan
I just bougt me a din and a minidin and I am about to solder a rgb lead for my Aes to the framemeister.
I have a question regarding the pinout from the Aes.
I use this one as my guide for the aes:
http://www.neo-geo.com/wiki/images/3/33/Avpinout.png
My question is, do I need to solder pin 3 (composite) and pin 7 (composite sync)?
I do only need rgb, but I was unsure if they are needed for some reason.
The pins I use in the framemeister is as follows:
http://www.gamesx.com/wiki/lib/exe/fetch.php?media=av:xrgb-mini-rgb_pinout.png
In this side, there is a Csync pin, is it needed (pin 3)
regarding sound, Pin 1 and 2, I just put mono on both pins?
And the last question, what is +5v out (pin 4 on the Aes) needed for
/Johan
Last edited: