Power supply 5Vcc @ 3.0 Ampers are enough ???

[Macck]

Guys i have here two systems:

AtomisWave
MVS-1F

And i used a PC powersupply to play whit them....but i don't like the PC PSU....because is too big and ugly....so in my city i found a good eletronic house whit some good eletronic PSU....is about +5Vcc @ 3A......so i can use this psu on my babyes ???

Thank you in advanced !!!

[]'Macck

 

[norton9478]

ATW: Probably not... and you will need 12 for the sound.

MV1-F.... More than enough... but you will have to get sound from the headphone connector.

 

[Macck]

ATW: Probably not... and you will need 12 for the sound.

MV1-F.... More than enough... but you will have to get sound from the headphone connector.

Yes man....this PSu have this output:

+5Vcc @ 3A
+12Vcc @ 1A

Input 100~240Vca 50/60hz

So did you think will works on my consolized systens ???

Thank you again...

[]'Macck

 

[Kyuusaku]

Yes considering I run my AES + MVS converter off a 9V 850mA supply...

 

[Macck]

Just to update information....

I decide to use the original Neo-CD powersupply on my Atomiswave and after 6 hours everything is fine.....so if someone wanted a good powersupply to use in the CAW use the Neo-CD PSU.

[]'Macck

 

[ZiEk]

Ive been serchin for some info on power suplys for Jamma, i read somewhere that the more amps the better but can it also be too much ??

+5 volts at 10 amps

-5 volts at 0.5 amps

+12 volts at 6 amps

-12 volts at 1 amp

Would that work for jamma/mvs ??

 

[Macck]

+5vcc @ 3A
+12vcc @ 1A

Are enought.....only if you are playing games like Mortal Kombat 1 and some others...need more xxAmpers.....

[]'Macck