DaemoN
Camel Slug
- Joined
- Nov 30, 2000
- Posts
- 523
Here's a pic of a generic JAMMA cab I restored and converted into a NeoGeo dedicated. It's going to have SvC Chaos PCB and a MVS 1-Slot inside.
*** CUT AND PASTE LINK IN A NEW WINDOW OR SERVER ANTI-LINKING WON'T LET YOU SEE THE PIC! ***
www.roarvgm.com/cabwip.jpg
It features:
* 240w nominal power, 8ohms
* 21" RCA Monitor
* New 8-Way Sticks and Buttons
* NeoGeo/SNK Sideart (coming soon in the mail)
* Lighted Marquee
* Brushed Steel Control Panel
What I DON'T have:
* No marquee for it :-(
* No Lock for the coin door :-(
What's I still have to do:
* Finish painting the metal parts from the marquee, speaker grills, etc and mount them in place
* Install T-Molding
* Wire the CP
* Clean the innards again
* Install angle iron on sides and back (front is done)
:-)
Just though I'd share, as I've been working hard on this.
I got the cabinet in pretty poor shape, patched/rebuilt lots of it and I'm very happy with the results!
- Daemon
*** CUT AND PASTE LINK IN A NEW WINDOW OR SERVER ANTI-LINKING WON'T LET YOU SEE THE PIC! ***
www.roarvgm.com/cabwip.jpg
It features:
* 240w nominal power, 8ohms
* 21" RCA Monitor
* New 8-Way Sticks and Buttons
* NeoGeo/SNK Sideart (coming soon in the mail)
* Lighted Marquee
* Brushed Steel Control Panel
What I DON'T have:
* No marquee for it :-(
* No Lock for the coin door :-(
What's I still have to do:
* Finish painting the metal parts from the marquee, speaker grills, etc and mount them in place
* Install T-Molding
* Wire the CP
* Clean the innards again
* Install angle iron on sides and back (front is done)
:-)
Just though I'd share, as I've been working hard on this.
I got the cabinet in pretty poor shape, patched/rebuilt lots of it and I'm very happy with the results!
- Daemon