Frasermozz
Another Striker
- Joined
- Jan 2, 2003
- Posts
- 320
Hi,
Don't suppose anybody can help me at first i tried the simple method of cuting both pal jumpers and bridging the ntsc jumper this worked but gave me distortion at the top of the screen (wavering) I've now replaced the timing crystal as suggested on Nick_th_fury's website this dosent seem to make one bit of diffrence the distortion is still there!!! loco
Anyway help would be appreciated the code on the board is AES3-4 if that helps.
cheers
Don't suppose anybody can help me at first i tried the simple method of cuting both pal jumpers and bridging the ntsc jumper this worked but gave me distortion at the top of the screen (wavering) I've now replaced the timing crystal as suggested on Nick_th_fury's website this dosent seem to make one bit of diffrence the distortion is still there!!! loco
Anyway help would be appreciated the code on the board is AES3-4 if that helps.
cheers