The PGM won't work until support is added for it. At best, with a happy coincidence, you'd get a strange skewed image out of it. When some free time dances by, I have plans to work on CPS3 and PGM support.
All NeoVGA boards are shipped out, except two international ones which need phone numbers. CPS2VGA boards go out next.
I believe yours are the ones I did send, and the remaining two I'm holding off on until I get the phone number. For that one I provided mine, but the postal worker explained that I probably shouldn't do that if I don't want international phone calls at ungodly hours of the night.
All NeoVGA boards are shipped out, except two international ones which need phone numbers. CPS2VGA boards go out next.
Sorry for the bad communication once more. City41, I should have mentioned it to you earlier when you asked, but - The CPS2 firmware had a problem I introduced when I fixed something else. I've been hunting it on and off during some free time, and figured it out tonight.
In particular, the blanking signal was not being activated at the right time in 480p component, so the green level was off on various monitors, but not on others. I hadn't seen it before because I had adjusted Y CLP on the 14L5 to make VGA work earlier, which allowed me to miss this. The timings have been fixed and the 4 CPS2 boards have been flashed.
You had two boards, one Neo and one CPS2 - so I had planned on sending them out together, but did not plan on the CPS2 fix taking longer. The remaining ones will go out tomorrow, finally.
Just dropped the remaining packages off today. Upon closer inspection, most people who wanted CPS2 stuff haven't paid yet, hmm...
Ah, yeah, that's real close! 24 hour guaranteed delivery!