- Joined
- Oct 6, 2004
- Posts
- 3,940
Maybe consider nerfing the spambot's links?Banned.
Anyone else?
xROTx
Maybe consider nerfing the spambot's links?Banned.
Anyone else?
xROTx
Banned.
Anyone else?
xROTx
I picked up a couple microSD cards recently, and I can finally answer your question.And can the NGX recognize SDXC cards; or only SD and SDHC?
I'm not sure which pin 2 you're asking about (SD or microSD side). Perhaps this is better? Cyan shows the existing wiring for an adapter:What is pin 2 on the SD adapter used for in relation to the micro SD card?
Very nice! Where did you end up getting the ribbon cable and SD socket?Anyway, I built 2 adapters, one to hook Ninja Masters to the PC to copy, the other to hook a Sd --> MicroSD adapter into the Neo Geo.
370 owner here. I do NOT want to open the unit up. My goal is unlimited continues. Tonight I achieved that goal, but what a pain. My SD --> MicroSD adpter isn't working, so I built a bigger one. That fine soldering isn't the issue, it's trying to cram the card back together. Anyway, I built 2 adapters, one to hook Ninja Masters to the PC to copy, the other to hook a Sd --> MicroSD adapter into the Neo Geo. I injected the Universe Bios per the instructions on this site. It defaults to Europe MVS, I can't seem to get into the menu. L1 & L2 change the aspect ratio, R2 & R1 don't pause they add credits.
At least, after the rom is loaded, I can remove the SD so I don't have to play with that ugly and annoying thing coming out the side.
Did you try hitting A+B+C on the splash screen? Here's some other codes you might try:I injected the Universe Bios per the instructions on this site. It defaults to Europe MVS, I can't seem to get into the menu. L1 & L2 change the aspect ratio, R2 & R1 don't pause they add credits.
Question: would it be possible to take Jalpert's design and use it to copy a ROM from your computer over to a SD card with the pins swapped, or would the data still corrupt along the way?
370 owner here. I do NOT want to open the unit up. My goal is unlimited continues. Tonight I achieved that goal, but what a pain. My SD --> MicroSD adpter isn't working, so I built a bigger one. That fine soldering isn't the issue, it's trying to cram the card back together. Anyway, I built 2 adapters, one to hook Ninja Masters to the PC to copy, the other to hook a Sd --> MicroSD adapter into the Neo Geo. I injected the Universe Bios per the instructions on this site. It defaults to Europe MVS, I can't seem to get into the menu. L1 & L2 change the aspect ratio, R2 & R1 don't pause they add credits.
At least, after the rom is loaded, I can remove the SD so I don't have to play with that ugly and annoying thing coming out the side.
When I attempted to do that, I could not write to the card properly from the PC, using the adapter. If I attempt to format, it simply corrupts the card and fails.Question: would it be possible to take Jalpert's design and use it to copy a ROM from your computer over to a SD card with the pins swapped, or would the data still corrupt along the way?
When I attempted to do that, I could not write to the card properly from the PC, using the adapter. If I attempt to format, it simply corrupts the card and fails.
There is no other way. Mr. Whitefolks is taking you guys for a ride. If there were truly an easier way, Im certain all of you guys would have figured it out by now. You guys are very smart and work very hard at this kind of stuff. All he wanted to do was stir the pot.
10+ years, 11,000+ posts, 100% feedback. Why would he start being a dick now?
Yea, I can easily believe him (and admire his reasons for withholding), it's just driving me crazy trying to figure it out.
There is no other way. Mr. Whitefolks is taking you guys for a ride. If there were truly an easier way, Im certain all of you guys would have figured it out by now. You guys are very smart and work very hard at this kind of stuff. All he wanted to do was stir the pot.
10+ years, 11,000+ posts, 100% feedback. Why would he start being a dick now?
I don't doubt his technical prowess and its no dig at him personally but if you knew information like that but didn't want to share because you assume it would be used for nefarious purposes, why let everyone know that you know? I dunno. To me it seems like a weird game of internet/mental keep away or something. BTW good job guys. It never ceases to amaze me what you can do.
I'm not fucking with anyone and I am (for now) keeping it quiet for several reasons. I've not replied to inquiries or posts directly to me about it. I've had several PMs asking me about it. Several people have attempted to bait me a bit (which I think this post was an attempt at), I'm not that stupid or careless.. so you can stop that nonsense right now.
I've had more than my share of technical contributions here and to the greater arcade collecting community. I don't ask for "credit", a pat on the back or acknowledgement for that work if that's what you guys think I'm getting at... in fact, I almost always specifically ask to not be named or credited for my work or contributions. Plenty of members can attest to that. I don't get off on seeing my name attached to anything.
I'm not fucking with anyone and I am (for now) keeping it quiet for several reasons. I've not replied to inquiries or posts directly to me about it. I've had several PMs asking me about it. Several people have attempted to bait me a bit (which I think this post was an attempt at), I'm not that stupid or careless.. so you can stop that nonsense right now.
I've had more than my share of technical contributions here and to the greater arcade collecting community. I don't ask for "credit", a pat on the back or acknowledgement for that work if that's what you guys think I'm getting at... in fact, I almost always specifically ask to not be named or credited for my work or contributions. Plenty of members can attest to that. I don't get off on seeing my name attached to anything.
Then why let on that you know such information when clearly you are aware of the fruits of such statements. No dig at you man. I don't know you from adam but I was just curious as I noticed that since that initial post you have remained silent.