Its late and iv been testing boards all night. Thought i would post this one up while im sleeping.
I plugged in a 4 slot into my test rig and proceeded to test each slot. I was able to get all 4 slots working. However, i am seeing a graphical issue.
The video seems to flicker in and out (to black screen) at random times. I thought this may have been a grounding issue because i didnt connect ALL the grounds for this test. I proceeded to do so... with out success.
When i wake up, im planning to double check my video connection (already did that) and check all the voltages (+5,+12) at the power pins.
If that doesn’t work, i may pull of and test all the caps on the boards.
Anywhere else i should be looking ? Does this sound familiar to some of the techs out there ?
check back in a couple of hours.. need ZzZzZzzz... ;-p
I plugged in a 4 slot into my test rig and proceeded to test each slot. I was able to get all 4 slots working. However, i am seeing a graphical issue.
The video seems to flicker in and out (to black screen) at random times. I thought this may have been a grounding issue because i didnt connect ALL the grounds for this test. I proceeded to do so... with out success.
When i wake up, im planning to double check my video connection (already did that) and check all the voltages (+5,+12) at the power pins.
If that doesn’t work, i may pull of and test all the caps on the boards.
Anywhere else i should be looking ? Does this sound familiar to some of the techs out there ?
check back in a couple of hours.. need ZzZzZzzz... ;-p