- Joined
- Apr 24, 2012
- Posts
- 1,268
Purpose : To use the new Neo Geo X Controller Sticks for other arcade reasons. You can solder directly to the chip*, or the legs from those specific buttons/joystick on the pcb. If you do this you can make it duel usb/db15 or you can just roll up the usb inside the case and easily restore the stick if you ever want to sell it again.[/B]
Inside the Controller :
6 cheap buttons and 4 micro switches attached to a pcb board set to an encoder.
Direct Picture of the board :
Chip :
You can solder directly to the chip*, or the legs from those specific buttons/joystick on the pcb. If you do this you can make it duel usb/db15 or you can just roll up the usb inside the case and easily restore the stick if you ever want to sell it again.
*I still have to verify 5v, but it looks correct, as my Multimeter battery died out.
End product.
Inside the Controller :
6 cheap buttons and 4 micro switches attached to a pcb board set to an encoder.
![photo15ls.jpg](http://imageshack.us/a/img41/347/photo15ls.jpg)
Direct Picture of the board :
![2h7jh3r.jpg](http://i50.tinypic.com/2h7jh3r.jpg)
Chip :
You can solder directly to the chip*, or the legs from those specific buttons/joystick on the pcb. If you do this you can make it duel usb/db15 or you can just roll up the usb inside the case and easily restore the stick if you ever want to sell it again.
*I still have to verify 5v, but it looks correct, as my Multimeter battery died out.
![1h5zf7.png](http://i50.tinypic.com/1h5zf7.png)
End product.
![photo17pc.jpg](http://img707.imageshack.us/img707/7741/photo17pc.jpg)
Last edited: