mikemann
Quiz Detective
- Joined
- Feb 9, 2014
- Posts
- 85
So I just got to the end of buttoning up a Neo Candy 25 restore that has a MVS-6 stuffed into it.
I just installed the Unibios 3.2 and switched out the battery to a coin-cell. Removed the 470 ohm resistor.
I'm having an issue with the board losing it's settings on power down and the clock running non-stop. Any ideas what's causing this?
The clock will retain it's settings briefly on a power cycle, but the system settings like enabling game select and turning off attract mode, get reset every time. Also the clock seems to run fine with power on as well, although that might need more confirming
See the video below -
I just installed the Unibios 3.2 and switched out the battery to a coin-cell. Removed the 470 ohm resistor.
I'm having an issue with the board losing it's settings on power down and the clock running non-stop. Any ideas what's causing this?
The clock will retain it's settings briefly on a power cycle, but the system settings like enabling game select and turning off attract mode, get reset every time. Also the clock seems to run fine with power on as well, although that might need more confirming
See the video below -
Last edited: