Official Ninja
Morden's Lackey
- Joined
- May 16, 2009
- Posts
- 373
I have a MV1C that had the battery removed.
I put in it's place a CR2032 rechargeable battery. It doesn't seem to hold the setting for very long. Not even a couple hours. When I checked continuity in my soldering I noticed there is continuity between plus and minus on the board. Battery removed. Is this normal? Or is something wrong with the board?
Thanks!
I put in it's place a CR2032 rechargeable battery. It doesn't seem to hold the setting for very long. Not even a couple hours. When I checked continuity in my soldering I noticed there is continuity between plus and minus on the board. Battery removed. Is this normal? Or is something wrong with the board?
Thanks!