Hey guys.
This schematic doesn't have any polarization marking for the capacitors. Judging by the picture of the finished product and how I would have made it the +ve side of the capacitor would on the input side and the negative toward the output.
However, I have an MV1-FZ here to tidy up that has had this mod done, however the capacitors dont have the same polarity, its as if they were just chosen at random? (one channel is one way, one is the other and where the two capacitors are connected there different).
Ive also noticed a domed cap in the audio section but im not sure if this is related to this mod or not.
Any thoughts.
This schematic doesn't have any polarization marking for the capacitors. Judging by the picture of the finished product and how I would have made it the +ve side of the capacitor would on the input side and the negative toward the output.
However, I have an MV1-FZ here to tidy up that has had this mod done, however the capacitors dont have the same polarity, its as if they were just chosen at random? (one channel is one way, one is the other and where the two capacitors are connected there different).
Ive also noticed a domed cap in the audio section but im not sure if this is related to this mod or not.
Any thoughts.