MV-1FZS is Stereo !!!

[MaximaBrazil]

Some people say in the forum that MV-1FZS is mono, but mine MV-1FZS are in stereo and have normal functions.
It is completely original and she does not have modifications.

somebody would have the manual of it? (MV-1FZS)

 

[Xian Xi]

Some people say in the forum that MV-1FZS is mono, but mine MV-1FZS are in stereo and have normal functions.
It is completely original and she does not have modifications.

somebody would have the manual of it? (MV-1FZS)

check hardmvs.com

 

[MaximaBrazil]

check hardmvs.com

The "hardmvs.com" only have information and manual for MV-1FZ and it is mono.
I need more information about MV-1FZ"S" !!!!

 

[DaemoN]

MV-1FZS === Stereo MV-1FZ, afaik.

Doesnt the last "S" stand for "Stereo"? :-)

(P.S. - ja viu os carts de MVS no mercadolivre de um tal de sabreroger? baratíssimos!)

 

[ttooddddyy]

Does your board look like this

OR does it look like this

I suspect you have the MV-1FS (like the lower piccy)

 

[Paulie G]

I have the same board as in the bottom picture MV1FS.

It has a switch situated just above the speaker slide that allows you to switch from stereo to mono. also there is a sticker on the plastic slot that reads.

CAUTION (monaural / stereo sw)

make sure the sw is on the monaural position, when you use JAMMA type cabinet.
Note) it may cause trouble on P.C.B. by miss setting

and it has a diagram of the switch & board.

 

[MaximaBrazil]

My board is the same from the first picture, but i am never see any switch !!!!!
and my board not have this sticker on the plastic !!!!

I go to look more the night today ....

I have the same board as in the bottom picture MV1FS.

It has a switch situated just above the speaker slide that allows you to switch from stereo to mono. also there is a sticker on the plastic slot that reads.

CAUTION (monaural / stereo sw)

make sure the sw is on the monaural position, when you use JAMMA type cabinet.
Note) it may cause trouble on P.C.B. by miss setting

and it has a diagram of the switch & board.

 

[Xian Xi]

My board is the same from the first picture, but i am never see any switch !!!!!
and my board not have this sticker on the plastic !!!!

I go to look more the night today ....

I guess your cab was wired for simulated stereo where you feed the mono signal to both speakers.

 

[MaximaBrazil]

I guess your cab was wired for simulated stereo where you feed the mono signal to both speakers.

Where place of the plate normally this is made?

I am starting to believe that it is this.

 

[norton9478]

The only way to tell is to run it in test mode...

Left should fire the left speaker.

Right should fire the right speaker.

 

[bconner]

Question

I have the board that's in the bottom picture.

The sticker on it indicactes the mono setting if for use with JAMMA, so stereo should be for MVS right?

The warning about using the wrong "MISS SETTING" causing PCB trouble. Any idea what's meant by that? Just poor sound quality, or could it mean physical damage to the board?

Thanks!

Bob

 

[ttooddddyy]

Just poor sound quality, or could it mean physical damage to the board?

Thanks!

Bob

Both

Distorted audio, also if you have it set to stereo in a jamma mono cab the board could suffer. (its like connecting one speaker between left + and right + on your Hi Fi)