Dropwire
Kuroko's Training Dummy
- Joined
- Jul 27, 2018
- Posts
- 75
Looking for guidance / help with a MV-1AX board. I repaired several bad traces, replaced the backup battery, checked the main 24Mhz Oscillator, checked the 32.768Khz XT, and still getting the flashing green screen with the watchdog reset/clicking sound. In the pictures:
Blue screen with garbled video is with all dip switches “on” (Ram test position)
Light Blue screen is with all dip switches off (normal operation)
Flashing Green is with cartrdge in slot and all dip switches off.
Hopefully someone can point me in the right direction as t my next steps with repairing this board, thanks in advance.
Attachments
-
A3492E8B-F5F2-4823-9D50-D55F85CF4105.jpeg1.1 MB · Views: 144
-
350DE60A-3B6B-4230-A698-D610D1C77CA4.jpeg935.3 KB · Views: 143
-
74F8EDFD-DDB8-4110-8B72-E4FF964D7F6C.jpeg1.7 MB · Views: 147
-
BA531820-E955-476F-91FF-D78B0BBA2597.jpeg1.3 MB · Views: 146
-
70A6C014-D033-414E-8341-339B87EA0C57.jpeg1.4 MB · Views: 139