MV-1 manual

[aluisi]

I dont have the manual for this board MV-1 does any one know where I can get one or a pdf of one. Also does the -5 volts need to be pluged in to the power suply for this board aor any neo geo board?

 

[aluisi]

Never mind

Just looked at my board and I found out that its a MV-1F so is there is no way I can hook up a memory card slot to this?

 

[SeaWolf69]

Here you go

http://www.hardmvs.com/html/PCBcompare.htm

http://www.hardmvs.com/html/Downloads.htm

 

[ttooddddyy]

"Also does the -5 volts need to be pluged in to the power suply for this board aor any neo geo board?"

Not for any MVS board, the earlier version of the Hyper64 uses -5 volts afaik ?

 

[chris1]

I dont have the manual for this board MV-1 does any one know where I can get one or a pdf of one. Also does the -5 volts need to be pluged in to the power suply for this board aor any neo geo board?

No..
I don't know of and MVS boards that uses the -5V

I have a MV-1 in that lil BAM machine.(in sig)
The manual I have shows no location for a -5v on the harness/not used.

NEO GEO

PARTS SIDE CKT SIDE CN2
------------ ------------ ----

1 GND A GND 1 SP+
2 GND B GND 2 SP-
3 +5V C +5V 3 SP-
4 +5V D +5V 4 SP+
5 E
6 +12V F +12V
7 KEY H KEY
8 CTR 1 J CTR 2

 

[aluisi]

So

Then none of them use the -5 then is there a way to hook up a memory card reader to the MV-1F board or did this board not come with that option?

 

[chris1]

Then none of them use the -5 then is there a way to hook up a memory card reader to the MV-1F board or did this board not come with that option?

No,I did not come with that Option.

MV-1F PCB

The MV-1F is very similar to the MV-1 except it lacks the MV-IC memory board connectors

This is what you would of needed..if you had a board that supported the memory Card reader.

# Of Slots 1
Cart Orientation H
Harness Type Jamma
On Board Memory Slot No
MV-IC Memory Board Support No
Joystick Ports Yes
Stereo Through Harness No
Stereo Through PCB Connector Yes
Stereo / Mono Switch Yes
Built In Headphone Jacks No
Headphone Connector Yes
Volume Control Yes
Headphone Volume Control Yes
BIOS Socket
MV-1F Manual
Notes:

The MV-1F is very similar to the MV-1 except it lacks the MV-IC memory board connectors
http://www.hardmvs.com/html/MV-1F.htm




...........................................................

Notes:
MV-1 PCB
This is the only 1 slot with support for the MV-IC memory board

 

[aluisi]

more board questions

Then is the Bios on the MV-1F replaceable? Also I have been going through some of these posts on here and I see alot of posts about diferant bioses and I was wondering why you all replace your Bios on your boards. What are the benifets of doing this?

I know full of questions but you all are the experts. I am new to the MVS.

 

[chris1]

Then is the Bios on the MV-1F replaceable? Also I have been going through some of these posts on here and I see alot of posts about diferant bioses and I was wondering why you all replace your Bios on your boards. What are the benifets of doing this?

I know full of questions but you all are the experts. I am new to the MVS.

Ask all the questions you like..That's what we are here for.
.................................................


Yes,you can change the bios Chip..it's Socket-ed..
It lifts up/unplugs and you can just plug in a new/another one...(Very Easy to do)

MV-1F BIOS Socket


Check out this link for the benifits of the Uni Bios.
http://unibios.free.fr/

I have a UNIVERSE BIOS in one of my 4 slot mother boards.
The best thing I ever bought,though I bought the board with it already installed by someone else.

 

[aluisi]

Wow thats really cool I was wondering about that before I always wanted to get the mod chip for my aes system I didnt know that it was also for the MVS thanks every one for all the info

aluisi

 

[chris1]

Wow thats really cool I was wondering about that before I always wanted to get the mod chip for my aes system I didnt know that it was also for the MVS thanks every one for all the info

aluisi

Your welcome,enjoy...