jamie666
Genam's Azami Sharpener
- Joined
- Jan 9, 2005
- Posts
- 1,505
Hi all. I have a UK dedicated Electrocoin 6 slot machine. Machine was working but I decided to remove the battery as that's recommend. When I removed it the battery had leaked and unfortunately took up some of the solder mask of the board with it. I have cleaned with white vinager and IPA and now the machine clicks when booting and won't start. I'm guessing I need some sort of trace repair.
My question is can someone in the UK point me in the right direction to send the board off and get it repaired? I have basic soldering skills but would like to send it off to someone that knows what they are doing with these in order to repair and go over the board to make sure it's in good shape for the future.
Cheers
Jamie
My question is can someone in the UK point me in the right direction to send the board off and get it repaired? I have basic soldering skills but would like to send it off to someone that knows what they are doing with these in order to repair and go over the board to make sure it's in good shape for the future.
Cheers
Jamie