- Joined
- Feb 7, 2002
- Posts
- 8,214
LoL.
Anyways, I would like to thank both Razoola and supergoose79 for their input on this one. Raz helped with some UNI Bios stuff and supergoose gave me the idea of mounting down the hardware with Hot Glue along with some other tips.
<img src="http://sgrepository.com/albums/broken02/close_carts.jpg" alt=" - " />
Up front of the new console. Pair of Insert coin buttons up front for player 1 and player 2. I built this one for Tetsuo311 and I am overall pleased with the way it turned out. My painting skillZ are average at best.
<img src="http://sgrepository.com/albums/broken02/inside.jpg" alt=" - " />
Now here is something I am proud of. I kept the inside wiring very neat and clean and use a different mounting system this time around. I Hot glued down the components. The PSU sits on top a small plastic base and is glued to it and then glued to the case. The JROK is mounted with screws to its plastic base and then that plastic base it also glued to the case. When I ordered the JROK, I asked for it to be shiped with no video connectors to be attached to it as I wanted to use a panel mount svideo connector and no composite. Also there is a RGB output on the console.
<img src="http://sgrepository.com/albums/broken02/rear.jpg" alt=" - " />
Backside of the console. Pretty standard stuff. I used a 8 pin DIN for the RGB output that way a standard NEO AES rgb cable can be used.
You can check out some more pic at SGR <a href="http://www.sgrepository.com/modules.php?set_albumName=broken02&op=modload&name=gallery&file=index&include=view_album.php" target="_blank">HERE</a>.
Thoughts?
Anyways, I would like to thank both Razoola and supergoose79 for their input on this one. Raz helped with some UNI Bios stuff and supergoose gave me the idea of mounting down the hardware with Hot Glue along with some other tips.
<img src="http://sgrepository.com/albums/broken02/close_carts.jpg" alt=" - " />
Up front of the new console. Pair of Insert coin buttons up front for player 1 and player 2. I built this one for Tetsuo311 and I am overall pleased with the way it turned out. My painting skillZ are average at best.
<img src="http://sgrepository.com/albums/broken02/inside.jpg" alt=" - " />
Now here is something I am proud of. I kept the inside wiring very neat and clean and use a different mounting system this time around. I Hot glued down the components. The PSU sits on top a small plastic base and is glued to it and then glued to the case. The JROK is mounted with screws to its plastic base and then that plastic base it also glued to the case. When I ordered the JROK, I asked for it to be shiped with no video connectors to be attached to it as I wanted to use a panel mount svideo connector and no composite. Also there is a RGB output on the console.
<img src="http://sgrepository.com/albums/broken02/rear.jpg" alt=" - " />
Backside of the console. Pretty standard stuff. I used a 8 pin DIN for the RGB output that way a standard NEO AES rgb cable can be used.
You can check out some more pic at SGR <a href="http://www.sgrepository.com/modules.php?set_albumName=broken02&op=modload&name=gallery&file=index&include=view_album.php" target="_blank">HERE</a>.
Thoughts?