aoiddr
Over Top Auto Mechanic
- Joined
- Jan 10, 2013
- Posts
- 855
I'd like to run some vertical jamma boards to my XRGB-mini Framemeister. I read that I can hook it up directly if I wire up my Jamma harness's video wires to a MiniDin plug (making a "Jamma to MiniDin cable").
I know I'd need to hook up Red, Blue, Green, Ground...
but what about Video Sync? Does that go to the CSync pin on the MiniDin?
Also, I read that I need to add 220 or 280 ohm resistors to the R/G/B to drop the voltage, but do I need only 3 (for R/G/B) or do I need a 4th one on Sync also?
I know I'd need to hook up Red, Blue, Green, Ground...
but what about Video Sync? Does that go to the CSync pin on the MiniDin?
Also, I read that I need to add 220 or 280 ohm resistors to the R/G/B to drop the voltage, but do I need only 3 (for R/G/B) or do I need a 4th one on Sync also?
Last edited: