free play for twin cobra/double dragon2 etc?

[bwodie]

hey doods!
i just got my twin cobra arcade pcb board, but i cant figure out how the hell to put it on free play
ive been through all the dip switches and it doesnt seem to have a setting for free play
i have a namco exceleena but havent got the coin mech wired up
i beleive my double dragon 2 board is the same... any one know how to either emulate a coin being put in or put it on free play?

 

[topher]

wire a button to the coin mech wire (#16 for 1p and T for 2p) and a ground from the harness...each press is a coin...

as far as free play, can't help you there on these 2 boards.

 

[bwodie]

that is so poo

 

[Murray]

The KLOV page for Twin Cobra has an installation manual link with dip settings in it. There's nothing listed for free play.

 

[bwodie]

ive been through all the dip switches and it doesnt seem to have a setting for free play

 

[Murray]

Right, I was just sort of confirming that in case you hadn't seen that specific manual.

 

[bwodie]

ahh
thanks anyways