Sorry if this has been asked and answered before. Had a search but couldn't find what I was looking for.
I'm currently consolizing an MV1C (my first effort) and I'm pretty straight on the way to go, until it comes to wiring up my audio/video output.
I'm in the UK, so only really need to go for RGB scart which I'm going to do through 8 pin Din connection to use the original AES scart cable pin out.
Only problem is, unless I make up a custom scart cable (which I don't fancy doing) I've only got the mono option through the original pin out.
Would it be an option to wire video only through the Din socket and use the L+R audio leads (taken off the stereo mod) to run a separate 3.5mm headphone socket alongside it for my stereo output?
It may sound a bit weird to go that way but retrogamingcables make up an RGB stereo scart with the audio broken out that way, so it would make life easier.
Just wanted to make sure I wasn't walking into more trouble than I started with!
Thanks in advance.
I'm currently consolizing an MV1C (my first effort) and I'm pretty straight on the way to go, until it comes to wiring up my audio/video output.
I'm in the UK, so only really need to go for RGB scart which I'm going to do through 8 pin Din connection to use the original AES scart cable pin out.
Only problem is, unless I make up a custom scart cable (which I don't fancy doing) I've only got the mono option through the original pin out.
Would it be an option to wire video only through the Din socket and use the L+R audio leads (taken off the stereo mod) to run a separate 3.5mm headphone socket alongside it for my stereo output?
It may sound a bit weird to go that way but retrogamingcables make up an RGB stereo scart with the audio broken out that way, so it would make life easier.
Just wanted to make sure I wasn't walking into more trouble than I started with!
Thanks in advance.