Tengugurl
Cheng's Errand Boy
- Joined
- Feb 9, 2017
- Posts
- 111
Hello,
I have a Neo Geo MVS 4-25 PCB that I am making into a CMVS 4 slot (ish....) (I know right?! why not get a MV1FZ because there is no documentation on CMVS 4slots lol)
The PCB is in working order (Cap kit done last year) and CGA/VGA pcb added to work outside of my cab.
I want to make a Supergun (out of an aluminum project box) to power the MVS (Leave it stock as much as possible) so I am using a new PSU and Rocker Switch to power the 2.1mm jack.
Here is the guide I am following to make a CMVS (it is for a 2 slot but should work...)
http://www.jamma-nation-x.com/jammax/cmvs2slot.html
List of items to Power the new Jamma harnass/ MVS:
1) PSU (+5v 6Amp as it is a 4 slot)
https://www.amazon.com/gp/product/B01EAF4YNE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
2) Rocker Switch able to handle the Amps from the PSU:
https://www.amazon.com/gp/product/B00WKNXWRS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
3) Female PSU jack:
http://www.ebay.com/itm/281278886620
I have a silly question...
I do not want to solder to the board and make a female PSU jack on the Heat shield, rather, I'd like to have it on the Supergun (Project box) but, I am not sure if I can use the Jamma harness +5v and -ground to power the console..... Is it possible?
So in sum,
I am looking to see if I can send 5+v 6Amp signal through the Jamma cable to the MVS Jamma edge without breaking my console.
Thanks for your help loves <3
Tengugurl
Link to the Jamma pinout in question
http://farm6.static.flickr.com/5149/5569027243_9570423c3a.jpg
I have a Neo Geo MVS 4-25 PCB that I am making into a CMVS 4 slot (ish....) (I know right?! why not get a MV1FZ because there is no documentation on CMVS 4slots lol)
The PCB is in working order (Cap kit done last year) and CGA/VGA pcb added to work outside of my cab.
I want to make a Supergun (out of an aluminum project box) to power the MVS (Leave it stock as much as possible) so I am using a new PSU and Rocker Switch to power the 2.1mm jack.
Here is the guide I am following to make a CMVS (it is for a 2 slot but should work...)
http://www.jamma-nation-x.com/jammax/cmvs2slot.html
List of items to Power the new Jamma harnass/ MVS:
1) PSU (+5v 6Amp as it is a 4 slot)
https://www.amazon.com/gp/product/B01EAF4YNE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
2) Rocker Switch able to handle the Amps from the PSU:
https://www.amazon.com/gp/product/B00WKNXWRS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
3) Female PSU jack:
http://www.ebay.com/itm/281278886620
I have a silly question...
I do not want to solder to the board and make a female PSU jack on the Heat shield, rather, I'd like to have it on the Supergun (Project box) but, I am not sure if I can use the Jamma harness +5v and -ground to power the console..... Is it possible?
So in sum,
I am looking to see if I can send 5+v 6Amp signal through the Jamma cable to the MVS Jamma edge without breaking my console.
Thanks for your help loves <3
Tengugurl
Link to the Jamma pinout in question
http://farm6.static.flickr.com/5149/5569027243_9570423c3a.jpg
Last edited: