ok i know the atomiswave has the use of the 4 and 5 buttons off the jamma harness. my blast has wires coming off jamma harness where these buttons are. there are these wires that go from the 1p harness over to the kick button harness im not sure if the lose wire needs to be reconnected for 4 and 5 button to work or not. im new at this stuff and im not quite sure what im looking at all the time. just need help to get this wired the right way
here you can see a green a pink and white going from one side to other. pink not in on one side
and here is my jamma harness its upside down so close side the white wires i believe is the 4 and 5 button wires
here you can see a green a pink and white going from one side to other. pink not in on one side
and here is my jamma harness its upside down so close side the white wires i believe is the 4 and 5 button wires