Hey guys,
I've got an AES which I bought from a deadbeat seller on ebay who won't refund me and refuses to believe the console has any problems but it's so obvious that if he had played it for hours like he said then he'd know exactly what I'm talking about. Regardless, I can't get a refund so I'll have to fix it.
One of the ADPCM channels is doing strange things, it seems the YM2610 is modulating the sample rate and muting it. I've included an audio file to show you what I mean (SS is an example, ALL games do it):
Samurai Shodown
http://www.gamernator.com/ng.zip
(WARNING!! TURN YOUR VOLUME DOWN!!)
The board DOES have a trace repair on the Neo-C1 chip though that seems fine. I think whatever is causing this is a result of whatever happened to the board to need the repair.
It sounds to me like the YM is doing this, due to the sample rate modulation and another thing is it seems to get louder when the console has been on a while. The YM also seems to get really warm, almost hot quite quickly. Is this normal on the older boards? I'd assume not.
So would I be right to assume this? Also, where might I be able to source a YM2610 from? Google searches prove useless.
Any help would be very much appreciated.
-Joel
I've got an AES which I bought from a deadbeat seller on ebay who won't refund me and refuses to believe the console has any problems but it's so obvious that if he had played it for hours like he said then he'd know exactly what I'm talking about. Regardless, I can't get a refund so I'll have to fix it.
One of the ADPCM channels is doing strange things, it seems the YM2610 is modulating the sample rate and muting it. I've included an audio file to show you what I mean (SS is an example, ALL games do it):
Samurai Shodown
http://www.gamernator.com/ng.zip
(WARNING!! TURN YOUR VOLUME DOWN!!)
The board DOES have a trace repair on the Neo-C1 chip though that seems fine. I think whatever is causing this is a result of whatever happened to the board to need the repair.
It sounds to me like the YM is doing this, due to the sample rate modulation and another thing is it seems to get louder when the console has been on a while. The YM also seems to get really warm, almost hot quite quickly. Is this normal on the older boards? I'd assume not.
So would I be right to assume this? Also, where might I be able to source a YM2610 from? Google searches prove useless.
Any help would be very much appreciated.
-Joel