Search results

Full kit or just console is fine. Also OK if laser does not work. Thanks! Mike

** USB Board Only, requires Universe BIOS 3.2+ for NCGD BIOS from Razoola ** [SOLD] This system allows you to develop homebrew code on a PC and upload it to a Neogeo CD for testing. It will let you upload small MVS games directly into the NGCD's ram banks and execute without any need for a CD...

I have a full USB NGCD Kit built and tested ready for sale. This kit includes the pc2neo device, an NGCD Neobiosmasta, pre-programmed NGCD Universe Bios and extension cable.

Congratulation Jasen Hicks - SRK Fight Stick of the Year & Tech Talk Company of the Year Jasen (www.jasenscustoms.com) won two categories this year! Good job man, keep it coming! http://shoryuken.com/2015/01/22/shoryuken-tech-talk-awards-2014-winners-announced/

This weekend I'm having two USB PC-2-NEO's built. One is already spoken for however I'll have another available for sale. PC-2-NEO allows homebrew code and NGCD and small MVS games to be uploaded to a top-loader NGCD from a PC over USB. A Top Loader fitted with NTM's NeoBiosMasta for NGCD and...

I have a couple of PVM-2030's and the one with the best picture has issues powering on when the room temperature in my workshop drops in the winter. It probably gets as low as 55F at night and when it does the PVM won't power up. The red "standby" light will light up briefly, then it will turn...

When my board 1st booted, Universe Bios warned "HARDWARE TEST FAILED" and I had to select the "Force to AES option". After than I could switch to arcade mode from the Universe Bios menu. On the SVC Chaos PCB 44-pin BIOS pin 12 is CE and 14 is OE. Apart from that NBM installation is the same...

I've designed two DB25 Interfaces for PVM-2030 users which simplify wiring to arcade PCB's or CGA output from supported cards in Mame. I had initially made these for myself but figured I'd also offer these to the group since I have more than I'll ever need. These are made to order and are $25...

Here's a video of a wireless joystick adapter I've been working on. Special attention was paid to avoiding latency and there is no noticeable delay. Many thanks to Raz for writing a custom timing application to clock transmission speed as seen by the Neogeo joystick circuitry. It was found...

I've been working on a custom linux kernel for these inexpensive handhelds over the last few weeks. With that I've been testing emulation targets since it's a gaming handheld. It got featured on hack-a-day http://hackaday.com/2013/11/08/linux-on-a-leapster-for-classic-video-game-emulation/ so I...