Does Anybody knows if uníverse BIOS will work with a 161 in 1 cartrige?
There should be no errors with the 161 in one and unibios 3.1. If you are getting errors in game then its due to faults with contacts or the cart.
To disable errors in the unibios all together simply enable arcade protect... Note the game is still going to crash and reset regardless.
Unibios before 3.1 would always show an error right after choosing a game with the multicarts. This is due to the very poor programming by the bootleg cart makers. If this is the error you are talking about then yes a unibios 3.1 will fix that. If you are talking about an error that happens during gameplay then a unibios 3.1 will not solve that because its a game crash for some reason.
Some if the metal slug games do weird things until you die once and let it initialize the save data.
Just got a CMVS Omega and a weird thing happens with Metal Slug 1. In arcade mode I'm stuck with 99 lives even though I have not enabled this cheat. In AES mode, unless I go to settings and switch at least one option (why is it defaulted to hard?) I will also be stuck with 99 lives. I dont remember this happening with another CMVS (older unibios) I had as I was keen on my highscores back then. Anyone see this happen? Doesnt happen to any other game. I don't think the game is bad (boot). I bought it over ten years ago and the boards are stamped SNK.
As pointed out some of the MS games do weird things unless you let them set up correctly. Youll need to be in MVS mode, then goto testmode and clear the backupRAM. now let the game boot, play a game and let it game over. Now all should be fine. Your problem started because when you first put the game in the system you were in console mode. Then that happens the backupRAM is not set up correctly.
As pointed out some of the MS games do weird things unless you let them set up correctly. Youll need to be in MVS mode, then goto testmode and clear the backupRAM. now let the game boot, play a game and let it game over. Now all should be fine. Your problem started because when you first put the game in the system you were in console mode. Then that happens the backupRAM is not set up correctly.
You can send the chip back to me and I will send you another once I get it back. Don't send the manual though. I'm guessing it got crushed?
Raz
My Omega has 3.0 bios and when you go into soft dip it just show garbage for the cart name. I tried swapping carts from Metal Slug 1 to Metal Slug 3 and it still show garbage for cart name.
Any way to fix this?
My Omega has 3.0 bios and when you go into soft dip it just show garbage for the cart name. I tried swapping carts from Metal Slug 1 to Metal Slug 3 and it still show garbage for cart name.
Any way to fix this?