What is needed to make a consolized MVS? (CMVS) Please help!

Hi
I'm soon getting a hold of a mv-2f slot motherboard. And it has joystick ports, memcard reader, stereo output, socketed bios etc =)

SO

What will i need to hook this baby to my tv?

I live in sweden but my tv supports both 50 & 60 hz

Can anyone please help me out here... what do i need and where can i get it?
I have seen some consolized MVS's here in the forum... did everyone of you buy a supergun to? or did you make one?

Please... i need as much help as i can get! Please remember, I live in swden so try to describe the things a little... my english isnt that great...

I posted on you other thread.

For future reference:
SEARCH BUTTON
For now:
http://www.neo-geo.com/forums/showthread.php?t=101460
read my posts.

Well, im in the middle of building my own MVS supergun (consolized MVS), and if you want to fully deck it out, id either solder some wires to the Edge connector itself, to create a ... test switch, service button switch (you could set it to freeplay, but if you do some, some MVS games you may have wont display the demo screens) also, i dont know if its just my own MVS board, the MVS bios, or both, but the joystick ports on my 4 slot only function fully on some of my games, partially on some, and dont work at all on others, so id ask for some more info on that right here on the tech forums. As for audio, i believe two slots have a headphone jack, so just either use headphones, or get one of those connectors, that you hook to the headphone jack ---> stereo red and white inputs. And finally, for video, your going to need a jrok converter, which converts a RBG signal, to an NTSC, or basic composite, or s-video signal for your tv. You can find more info about those on the tech forums. Any more questions dont hesitate to ask. Good luck, and have fun with your NEO!

If you're looking for a video board, you will want the Neobitz board -- Component/SVideo/Composite. www.neobitz.com

Jeff