How to Consolize an MVS Board

In This Guide

In this guide I will show you how to consolize an MV-1C MVS board. What is consolization you ask?

Consolization is basically turning an arcade board which is made to be played in an arcade cab playable on a regular TV with control pads just like any other home console, hence the name "Consolization". The difference between a CMVS and a supergun is that a CMVS is a "dedicated" supergun that only plays MVS games.

This is where you ask yourself do you want to make a CMVS or a supergun. You decide.

Parts Needed

• Wiring (I use 22 awg usually)
• Solder (I prefer leaded 2% silver)
• Soldering Gun
• Audio, Video and Power Jacks (I use color coded Gold Panel Mounts)
• RGB > NTSC Video Encoder (Neobitz, JROK or similar)
• +5v Power Supply, I prefer this one from Jameco.
• Dremel or Xacto Knife for cutting
• DB15 Controller Ports
• Ice Cold Beer (After Completion)

Enclosures

For enclosures it is all up to you, you can either do an "Open Face" CMVS which is a bare board with no fancy enclosure or a fully cased CMVS. Keep in mind that putting an MVS board into a case can be difficult and also may take you a while to find an enclosure you like.

Several companies make plastic, wood and metal enclosures. Hammond Manufacturing makes both plastic and metal ones. Other companies like PacTec only make plastic ones. Some CMVS builder have used Plexiglass, old PC cases and even NGH and NeoCD cases. Making an "Open Face" CMVS takes about 3-5 days to complete depending on cleanliness. An enclosed CMVS can take up to 3 weeks depending on difficulty with the casing material. However an "Open Face" 2 slot will only take you about 8 hours or less total build time, this is due to having everything you need already on the board and all you need is a PSU and RGB > NTSC Encoder.