Wierd monitor question

[EVIL NICK]

I have a WG 25K7193 that displays the picture slightly rotated clockwise ( very slightly ).

Is there a way to fix this easily?

Thanks in advance!

 

[channelmaniac]

if there's not a control for it then you very slightly rotate the yoke the other way...

BUT - be prepared if you do that to go through and reconverge the color & purity by moving the magnet rings on the neck of the picture tube. That is something that is NOT fun... I'd personally live with the rotation or swap out whole monitors before I'd dink around with that.

RJ

 

[EVIL NICK]

Ah crap

Found out the hard way... it's level now, but the convergence is screwed up...

It was kind of off before , so I'll tinker around with it... >_<

 

[channelmaniac]

If you ever get a trinitron type monitor, you can adjust most of that stuff electronically... very few other monitors do that electronically... It's a PITA manual adjustment.

 

[EVIL NICK]

Well, I think I'll have a fun time reconverging the monitor...

 

[channelmaniac]

You need to find the manual for the monitor and put a crosshatch pattern on the screen... There are different rings that handle purity and convergence and it takes a fine hand to get 'em working right.

RJ