What arcade stick do you own?

[Ajax]

Finally got one of these.


New everything here. Seimitsu LS-70x lever, Sanwa buttons. Wired the auxiliary button panel so that it actually works. Had to drill out the area directly below the lever to accommodate the length of the shaft . Of course modified it for use with other platforms. There’s not a lot of room in this one.

 

[Hattori Hanzo]

I want to do mine for ages. Got it cheap with a messed up PS2 mod. Nice cable goobing as always.

 

[HellioN]

Finally got one of these.
View attachment 71660

New everything here. Seimitsu LS-70x lever, Sanwa buttons. Wired the auxiliary button panel so that it actually works. Had to drill out the area directly below the lever to accommodate the length of the shaft . Of course modified it for use with other platforms. There’s not a lot of room in this one.
View attachment 71663
View attachment 71662

Sid you use a step bit or a hole saw to cut the case?

 

[Ajax]

Conveniently, there’s a hole in the steel right there. It’s just about 24mm, the same size hole you need for JP start and select buttons, so I used my hole saw to drill that out, then cleaned it up with a dremel tool.

 

[kernow]

VSHG with the guts ripped out and replaced is the only stick I own

 

[HellioN]

VSHG with the guts ripped out and replaced is the only stick I own

 

[kernow]

Alright kof97 pad settle down